10mm x 245mm KonstruX fully threaded screw

• High extraction resistance
• Strong joints

• Reduced screwing torque
• Greater extraction resistance

KonstruX fully threaded screw

The powerful solution for construction and renovation

One system for all timber-frameconstruction joints

• Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
• Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
• Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
• Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
• Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
• Hidden connections, high fire-resistance, no thermal bridges
• No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
• The required edge and centre distances can be minimised for screws that are only exposed to tension.