Rag Bolts Din 529................................................. (SWIFTFIX - Phone 023 80 446644)
Rag Bolts are available in M10, M12, M16, M20, M24 & M30Various lengths are available please contact Swiftfix for more information and prices. Phone us on
023 80 446644 or email us at firstname.lastname@example.org
When imperial indented foundation bolting (IFB) to
BS.1494 was made obsolete, no
equivalent was issued and therefore,
when they were converted over to metric sizes, they were
replaced by and manufactured
in accordance with DIN.529, Pattern E.
The best results are obtained when IFB's are placed in situ when the concrete is poured.
this is not possible or when fitting to existing structures, the hole
required should be 6-10mm
larger than the maximum diameter (E), and not less
than 10mm deeper than the portion of
embedment (D). The prepared grout mixture
should then be poured into the cavity and the
bolt inserted, ensuring that
the bolt is rotated to released trapped air pockets.
It is important to allow
the grouting mix to set thoroughly before loading the bolt.
SWIFTFIX Unit 8 Mill View Barn, Grange Road, Netley, Southampton,
Hampshire, United Kingdom, SO31 8GD.Phone 023 80 44 66 44 / 023 80 45 53 99
Fax 023 80 44 84 44
Terms & Conditions